Filter By:
- Parts & Accessories (130)
- Cranksets (245)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Cranksets
$11.00
TruVativ Crank Arm Fixing Bolts
- Monocoque carbon crankset with hollow-arm design
- FSA Mega Tooth chainring design greatly improves chain retention
- FSA BB392 compatibility allows use in nearly any frame
- Bottom bracket not included
$72.00
- Series: SLX
- Crank Construction: HOLLOWTECH II Technology
$14.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact.
- For Descendant Carbon and non-Eagle XX1 and X01
$69.99
$140.00
50% Off
SRAM's GX 2x10 Crankset w/All Mountain Chainguard delivers consistent performance every time out. Featuring SRAM’s X-GLIDE chainrings, the GX crankset is engineered for 2x10 shifting performance. Flawless shifting means you’ll never again compromise your speed and power in unpredictable off-road terrain. No more missed shifts. X-GLIDE puts you in the right gear, right now.
- 6000 series AL
- X-GLIDE 2x10 shifting technology
• Weight: 799g (GXP, 175mm, 36/22T)
• Chainguard included, but not shown
$485.00
Strength is how the X01 Eagle DUB crankset takes capability to places never before reached. It’s the strongest crank in the entire Eagle ecosystem, and it holds this status at a weight that is hard to fathom. It features industry-proven and rider-beloved DUB technology to radically simplify the relationship of spindle to bottom bracket, delivering unprecedented simplicity, compatibility, and durability.
- The strongest crank in the entire Eagle ecosystem.
- Master X01 colorway as part of Eagle Colorsystem—goes with all cassette and chain color options.
$39.99
Suntour's XCM-T is a 9-speed triple crankset with melt forged alloy arms that comes in either square taper or Octalink bottom bracket options.
- Steel chain rings
- Forged alloy crank arms
- 50mm chain line with a 113mm BB
$12.99
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips.
Compatible with:
- Race Face
- Turbine Cinch
- Atlas Cinch
- Atlas (24mm Spindle)
- Turbine (24mm Spindle)
- Aeffect Cinch (175mm length ONLY)
- Most other popular alloy MTB cranks (except some alloy DH cranksets)
$99.99
RaceFace Ride crank arms are forged from 6066 aluminum with aggressive styling for a high strength to weight ratio.
- Bottom bracket sold separately
$12.00
Race Face aluminum Torx chainring nut/bolt set for triple chainrings. Includes four nut/bolt sets.
$5.49
Problem Solvers Crank Arm Fixing Bolts
- 8mm
- Sold as a pair
$11.95
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms
- Sold as singles
$9.95
- Replacement bolt kits for mounting chain guides to ISCG and ISCG-05 frame tabs
- Kits include chainline adjustment spacers
- 8/12mm button head bolts for single ring steel backplate guide applications
- 10/16mm flat head bolts for single ring alloy backplate guide applications
$17.95
- Adapts ISCG-05 mount chainguide arms to fit flange or lockring style bottom brackets
$399.00
e*thirteen's TRS Race carbon crankset is crafted from lightweight components, so you can hit the trails at full speed.
- Features compression molded carbon fiber crankarms and a 73mm aluminum P3 Connect spindle for superior durability and weight savings
- Spindle is located on the non-drive side of the crank for easier chainguide setup and drivetrain maintenance
- Crank and spindle features Quick Connect lockring and Adaptive Preload Adjuster for easy chainring installation
- The adjustable chainline accommodates non-Boost (142mm), Boost (148mm), and Super Boost (157mm)
- Compatible with e*thirteen's SL Guiderings (28-38t options for non-Boost and Boost frames) and UL Guiderings (30-42t options for Super Boost frames)
- Compatible with the following bottom bracket standards: 68/73mm threaded BSA, PF30, BB30, BB92
- Number of Chainrings: No Rings Included
- Crank Intended Use: Mountain
- Pedal Spindle: 9/16"
- Spindle Interface Type: e*Thirteen P3 Connect
- Drivetrain Speeds: 11, 12
- Chainring BCD: Direct Mount e*Thirteen
- BB Included: No
$399.00
Rise and Grind with our lightest cranks ever!
We applied decades of World Cup racing experience to develop our patented design for the lightest production carbon crankset we've ever made!
Lightweight, 30mm spindle, APS preload adjuster, and self-extractor bring the class-leading combo to your door.
- Lightest production crank on the market
- Gen4 cranks have the spindle on the non-drive side of the crank for easier chain guide setup and drivetrain maintenance
- Use a Boost chainring to fit non-Boost chainlines on this 68mm BB crank
- Now includes an 8mm self-extractor, meaning the cranks can be removed with nothing more than an 8mm allen key
- Carbon fiber crank arms and aluminum spindle w/ Quick Connect lockring and Adaptive Preload Adjuster (APS), compatible with all - Quick Connect guide rings
- 385g (73mm w/32T UL chainring), 398g (68mm w/38T UL chainring)
$399.00
The e*thirteen XCX Race crankset offers ultra-lightweight construction and uncompromising strength.
- Features compression molded carbon fiber crankarms and a 73mm aluminum P3 Connect spindle for superior durability and weight savings
- Spindle is located on the non-drive side of the crank for easier chainguide setup and drivetrain maintenance
- Compatible with the following bottom bracket standards: 68/73mm threaded BSA, PF30, BB30, BB92
- Crank and spindle features Quick Connect lockring and Adaptive Preload Adjuster for easy chainring installation
- Designed to be used with e*thirteen's ultra-lightweight UL Guidering (30-42t) for optimal weight savings
- Number of Chainrings: No Rings Included
- Chainline/Hub Compatibility: 135/142 MTB Hubs , 141/148 Boost Hubs
- Crank Intended Use: Mountain
- Pedal Spindle: 9/16"
- Spindle Interface Type: e*Thirteen P3 Connect
- Drivetrain Speeds: 11, 12
- Chainring BCD: Direct Mount e*Thirteen
- BB Included: No
$349.00
The e*thirteen e*spec Race Carbon Crank Arm Set is designed to work with Bosch Gen 4 eBike motors. These carbon crank arms offer a slim Q-factor and smaller overall profile, while keeping e*thirteen's proven crank technology at the forefront.
- An 8mm self extractor bolt is built into both arms for easy removal
- World-Cup DH-rated layup and construction
- Compacted carbon fiber with an additional 3k added to front and rear faces of crank for impact resistance
- Number of Chainrings: No Rings Included
- Chainline/Hub Compatibility: 141/148 Boost Hubs, 150/157 Hubs
- Crank Intended Use: Mountain
- Pedal Spindle: 9/16"
- Designed for ebike: Yes
- Drivetrain Speeds: 11, 12
- Chainring BCD: Direct Mount Bosch
- BB Included: No
$17.99
absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability.
- Bolts use a Torx T30 interface for greater reliability
- Long bolts are used for the following chainrings: 110 BCD 4-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings
- Set of 4
$21.99
absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability.
- Bolts use a Torx T30 interface for greater reliability
- Long bolts are used for the following chainrings: 110 BCD 5-bolt outer and inner road oval, 130 BCD 5-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings
- Set of 5
$17.99
absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability.
- Bolts use a Torx T30 interface for greater reliability
- Short bolts are used for the following chainrings: 104 BCD oval 34/36t, 104 BCD round 32/34/36/38t, and bashrings
- Set of 4
$54.99
The absoluteBLACK premium crank bolt and bolt cover sets are designed to cover the small step down between chainring and crank arms.
- Designed to fit Shimano Dura-Ace 9000 cranks
- Includes 4 T30 Torx bolts and 4 bolt covers
- Not compatible with absoluteBLACK Sub Compact oval chainrings
$54.99
The absoluteBLACK premium crank bolt and bolt cover sets are designed to cover the small step down between chainring and crank arms.
- Designed to fit Dura-Ace 9100 cranks
- Includes 4 T30 Torx bolts and 4 bolt covers
- Not compatible with absoluteBLACK Sub Compact oval chainrings
$54.99
The absoluteBLACK premium crank bolt and bolt cover sets are designed to cover the small step down between chainring and crank arms.
- Designed to fit Shimano Ultegra 6800 cranks
- Includes 4 T30 Torx bolts and 4 bolt covers
- Not compatible with absoluteBLACK Sub Compact oval chainrings
$54.99
The absoluteBLACK premium crank bolt and bolt cover sets are designed to cover the small step down between chainring and crank arms.
- Designed to fit Shimano Ultegra 8000 cranks
- Includes 4 T30 Torx bolts and 4 bolt covers
- Not compatible with absoluteBLACK Sub Compact oval chainrings
$74.99
The Taco Bashguard is designed to protect your chainring from obstacles like logs or rocks. It is hidden behind the crank and mounted to ISCG05 tabs that are located around your bottom bracket. It offers great protection for both oval and round chainrings, especially direct mount rings that cannot mount to a standard 4-bolt bashring. The Taco Bashguard fits up to a 32T oval chainring or 34T round one.
- The Taco Bashguard can be used with any chainring from 26T-32T oval or 26T-34T round
- Box includes taco bashguard (assembled), 6 x 1mm spacers, 3 x 3mm spacers, 3x 16mm stainless bolts, and 1 x 12mm stainless bolt
- Weight: 56g
$39.95
- Bash guard protects chainring from logs, rocks and other trail hazards
- Designed and manufactured in the USA from 7075-T6 aluminum alloy
- See wolftoothcycling.com for mounting tips - 51g (26-30t)
Page 1 of 13
Next page